Monday, November 23, 2026 · Leading English Source for Global Coffee Industry

"milk steaming"

3000 article(s) found

How long is the foam suitable for making latte coffee? How thick is the foam?

How long is the foam suitable for making latte coffee? How thick is the foam?

The knowledge of milk foam was shared in detail before Qianjie. Recently, however, a friend sent some videos of milk foaming, asking Qianjie to give some suggestions. It happens that these problems are relatively easy for novices to make milk bubbles, so I will specifically talk about a few points to pay attention to when making milk bubbles. The first category, finish

2022-12-15
There is no milk bubble pot.-how to play coffee foam?

There is no milk bubble pot.-how to play coffee foam?

Coffee pull flower 1. Pour the milk into the milk bubble pot, do not exceed the capacity of the milk bubble pot 1x2, otherwise the milk will overflow due to expansion when making milk foam. two。 Heat the milk to about 60 ℃, no more than 70 ℃, or the protein structure in the milk will be destroyed. Be careful! The lid and strainer cannot be heated directly. (if ice foam is made, cool the milk to less than 5 ℃.

2016-11-07
The influence of the difference of the flower jar on the flower, how to make the foam dense and delicate to make the flower more beautiful?

The influence of the difference of the flower jar on the flower, how to make the foam dense and delicate to make the flower more beautiful?

Coffee flower, is one of the signature skills of baristas, a perfect cup of cappuccino, Latte, mocha works, the presentation of flowers give the beauty of coffee, give guests and baristas themselves are pleasant. When talking about the importance of milk selection and application when making delicious Cappuccino and Latte Art in coffee teaching, the principle of milk foaming is discussed.

2018-05-05
Foaming skills | how to find the right angle of the steam stick and how to deal with the dense foam?

Foaming skills | how to find the right angle of the steam stick and how to deal with the dense foam?

Recently, it has been found that many enthusiasts and newcomers are still more concerned about the problem of foam, so I will summarize my personal experience for some of them. It is recommended to use full-fat milk with a fat content of 3.2-3.8%. Using Weiji fresh milk as a reference temperature is too high and tastes bad, and it will destroy milk molecules and cause flavor loss, protein coagulation, poor fluidity, etc., low temperature (premise

2018-09-24
What kind of milk do you use for coffee foam?

What kind of milk do you use for coffee foam?

Following Cafe Review (Wechat official account vdailycom) found that after opening a small shop of its own, playing a certain amount of milk foam and milk fusion, there is a certain degree of fluidity and silkiness (Crema is also), so the so-called pure milk foam that can appear brown and white does not have good fluidity, and pure milk can not be mixed with Crema. First of all, we need to figure out

2017-07-11
The method of making milk foam of cappuccino coffee

The method of making milk foam of cappuccino coffee

The perfect combination of Cappuccino cappuccino coffee and milk gives people a very rich feeling. Make this cup of coffee, to prepare delicate milk foam, as the base of the Espresso, if the technology is excellent, then pull flowers on the milk foam, will make cappuccino more vitality. The following details are introduced respectively: first, the production of milk bubbles: method one: making handmade milk with a milk bubble pot.

2015-03-03
How does the milk bubble come out of the coffee? The technique of manually beating milk cannon

How does the milk bubble come out of the coffee? The technique of manually beating milk cannon

Keep it simple, the material used: 1. Nestl é all official Milk 2. Milking machine method 1: use a milk bubble pot to make manual milk foam 1. Pour the milk into the milk bubble pot, do not exceed the capacity of the milk bubble pot 1x2, otherwise the milk will overflow due to expansion when making milk foam. two。 Heat the milk to about 60 ℃, no more than 70 ℃, or the protein structure in the milk will be destroyed. Be careful! Lid vs.

2015-11-09
What are the requirements for the steam of frosting and the extension of the foaming principle

What are the requirements for the steam of frosting and the extension of the foaming principle

What kind of requirements do we usually have for foam steam? The stable and stable steam volume of ① is the most important point, and the large and small steam is often the main culprit that you can't beat the milk foam finely. The moderate size of ② is not the bigger the better. Too much steam will cause the milk to heat up too fast to foam in time; it is easy to rotate too much.

2019-06-02
Coffee Classroom-Seventy-two variations of Italian fancy coffee Fancy coffee teaching

Coffee Classroom-Seventy-two variations of Italian fancy coffee Fancy coffee teaching

Professional coffee knowledge exchange More coffee bean information Please pay attention to coffee workshop (Weixin Official Accounts cafe_style) Coffee types Small classroom 5 kinds of common fancy coffee shop Common coffee types and characteristics Introduction The so-called Italian fancy coffee is coffee based on espresso and added with other ingredients, fresh milk chocolate whipped cream and hot water in many flowers

2018-03-16
Why is espresso milk floating on it? Video tutorial

Why is espresso milk floating on it? Video tutorial

Why is espresso milk floating on it? The video tutorial allows the steam tube to touch the surface of the milk. The tube is about a finger away from the inner wall of the cup. Turn on the steam switch and start making the steam work. If the tube is too far from the surface of the milk, the milk will be sprayed everywhere; on the contrary, if the tube is too deep under the surface of the milk, there will be no vortex in the milk cup.

2016-11-14
The production of milk foam

The production of milk foam

Method 1: use a milk bubble pot to make handmade milk bubbles. 1. Pour the milk into the milk bubble pot, the amount of which should not exceed 1 bank 2 of the milk bubble pot, otherwise the milk will overflow due to expansion when making milk bubbles. 2. Heat the milk to about 60 degrees, but not more than 70 degrees, otherwise the protein structure in the milk will be destroyed. Be careful! The lid and strainer cannot be heated directly. (e. G. making ice

2014-08-20
What kind of milk does coffee go with? how do you play the coffee machine? how do you play the milk foam?

What kind of milk does coffee go with? how do you play the coffee machine? how do you play the milk foam?

1. Prepare the milk (also whole milk) and heat the milk to 60 ~ 70 degrees. Milk can be directly placed in a milk bubble to be processed on a gas stove or induction cooker, or it can be heated in a porcelain cup or glass in a microwave oven. If you use the microwave oven, because you want to pour into the bubble machine, it will absorb a certain temperature, and the heating temperature should be slightly higher. But not higher than 75.

2016-07-30
The skill of beating milk foam with coffee steam and the matters needing attention how to beat thick but not rough milk foam

The skill of beating milk foam with coffee steam and the matters needing attention how to beat thick but not rough milk foam

Professional coffee knowledge exchange more coffee bean information please follow the coffee workshop (Wechat official account cafe_style) coffee steam foam skills: 1, in fact, the steam nozzle is not necessarily away from the surface of the milk. Not too deep or too shallow. If it goes deep, it will only heat the milk, and if it goes shallow, there will be big bubbles. 2. How to rotate, different people have different habits. The video will say

2019-03-02
Pictorial course of Coffee Breaking skills-how to beat foam with Coffee Machine Steam

Pictorial course of Coffee Breaking skills-how to beat foam with Coffee Machine Steam

How to foam coffee machine steam (1) place the steam pipe in the center of the steel cup, tilted 45 degrees to the upper right and near the edge of the cup, the depth is about 1 centimeter. (2) turn on the steam pipe, move the steel cup down slowly, and roll the milk up and down and slowly let the volume expand. (3) when the foam expands to eight minutes full

2016-11-30
How to practice flower drawing with coffee and milk circulation

How to practice flower drawing with coffee and milk circulation

How to use coffee and milk cycle to practice pulling flowers 10 so that you can leave a lot of milk to practice. Do not throw away the used milk and you can use it several times.) after that, all you have to do is put the steam milk into the extracted espresso. Recommend novices to make steam milk before making espresso. Don't ask me why.

2016-11-22
Video teaching of espresso making methods-grinding, filling, extraction and steaming milk

Video teaching of espresso making methods-grinding, filling, extraction and steaming milk

Professional coffee knowledge exchange more coffee bean information please follow the coffee workshop (Wechat official account cafe_style) Espresso coffee extraction detailed steps of Italian concentrate common sense grinding (Grinding) and packing (Tamping) when the coffee beans have been put in the bean trough (bean hopper), you can begin to grind the coffee beans into powder. Bean grinder (grinder)

2017-12-31
Why do you want to share a cup of milk foam before coffee? The advantage of dividing the cup after the foam is beaten.

Why do you want to share a cup of milk foam before coffee? The advantage of dividing the cup after the foam is beaten.

Professional barista communication Please pay attention to the coffee workshop (Wechat official account cafe_style) milk foam is the use of steam to beat the external air into the milk, and then beat him apart, without this external air, the steam will only heat the milk, not foam! Some coffee lovers asked the question that the household semi-automatic coffee machine is not dense with milk foam, aiming at this problem

2017-11-01
A course in milk foaming

A course in milk foaming

① first open the steam pipe, drain the possibly wet steam ② to adjust the angle of the steam stick, insert the steam diagonally below the liquid level of the milk, turn the steam to the maximum level in 2mm ③, control the depth of the steam stick, try not to let the large bubbles produce ④, let the bubbles rotate with the milk, so that the bubbles will merge with the milk, and let the milk bubbles more delicate and ⑤ beat the milk to about 60 to 65 degrees.

2014-08-26
Isn't the coffee made with medium fat milk? Which kind of milk is the best?

Isn't the coffee made with medium fat milk? Which kind of milk is the best?

The method of double-layer milk bubble cup 1. Prepare the milk (also whole milk) and heat the milk to 60 ~ 70 degrees. Milk can be directly placed in a milk bubble to be processed on a gas stove or induction cooker, or it can be heated in a porcelain cup or glass in a microwave oven. If you heat it in a microwave oven, because you want to pour it into the foam machine, it will absorb a certain temperature, and the heating temperature should be slightly higher.

2016-10-18
↑